Search This Blog

Sunday, March 11, 2012

555 timer


EXPERIMENT

PROBLEM STATEMENT:
We create a 555 timer circuit that you can control the light produce by the LED.

Equipment we used:
555 timer
Potentiometer
1k ohm resistor
10k ohm resistor
20k ohm resistor
20 microfarad capacitor
LED
Breadboard
20k ohm potentiometer




ASSEMBLY INSTRUCTIONS:
555 timer
In setting our 555 timer, the first thing to do is to determine what will be our time and period. Before assembling it on the breadboard, we familiarize the pin configuration of the 555 timer and the resistors. Since we are already familiar of the pin configuration of the following materials, we assemble these materials in the breadboard. 

 SCHEMATIC DIAGRAM
As we conduct the experiment, as we increase the value of the potentiometer,
the light of the LED will increase depending on the value of the potentiometer.
The Higher the value of the potentiometer, the more light will produce by the LED.
And in this plate, we get to familiarize the use of the 555 timer which we will be used in the future plates in this subject and we will enjoying this because we learned a lot. 


OUTPUT



No comments:

Post a Comment